● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Modification and customization of the 3D printer are strictly forbidden. We will take no responsibility for any problems resulting from modifications.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
NEJE DK - BL1500mw Laser Engraver
The laser engraver printer machine print of high power and 550 x 550 pixel high resolution. It can be controlled by windows PC, iPhone, iPad, iPod touch and Android cell phone. And soft material can print out the 3D and the gradient effect! Unique frame, weak light automatic positioning and frame positioning make the image positioning easier! Good at Engraving depth and image engraving.
● Built-in 6000mAh Li-ion battery, provide 4A output, high power and create anytime anywhere, can be used offline without cable connect any power
● 42 x 42 x 78mm caving space
● Laser lifetime up to 100000 hours
● Materials cutting depth up to 7.8mm
● With 108 screws and alloy structure, make it strong, also you can design your structure in the machine
● Power cut memory function. If the battery power is insufficient, use a mobile power or a 5V 1A supply, it will continue to carve
● Lone time use, NEJE developed the professional power IC and radiator, carving time will last much longer than other laser and more stable
● Good at image engraving and depth engraving, extremely wide scope of application
● Can be carved items included: hardwood, plastic, bamboo, rubber, leather, miniature engraving, cut paper and so on ( not include gold, silver, copper, and iron )
● Support Win 7, XP, Win 8, Win 10, iOS 9.0 and above, Android 4.0 and above
Bluetooth: Bluetooth 4.0
Battery capacity: 6000mAh
Battery working time: more than 3 hours
Caving space: 42 x 42 x 78mm
Laser wavelength: 405nm
Laser type: impulse
Temperature: 500 Deg.C
Support software: NEJE
Supported image formats: JPEG, BMP ( 24 bit only ), TIFF, PNG ( 32 bit or less ), PCX ( 8 bit and 24 bit RLE )
PCD image size: 550 x 550 pixels
Engrave mode: bitmap carving
Input: USB ( 5V 1A or 2A )
Frame material: acrylic + aluminum + stainless steel
Laser can replace: yes
Product size: 14.50 x 16.00 x 20.00 cm / 5.71 x 6.30 x 7.87 inches
Package size: 30.00 x 20.00 x 21.00 cm / 11.81 x 7.87 x 8.27 inches
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
1. Please read and follow the user manual carefully before you assemble or operate the 3D printer.
2. Modification and customization of the 3D printer is strictly forbidden. We will take no responsibility for any problems resulting from modifications.
3. Always use the correct AC voltage for your region.
4. Please do not place the the 3D printer near flammable/combustible materials, or any heat sources.
5. Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.